Drive Test at VicRoads Mooroolbark
Passing Drive Test at Vicroads Mooroolbark
All Victorian learner drivers must go through the VicRoads drive test. The entire process is an easy one to go through the training and then pass the driving test.A comprehensive plan is the best one to maximize the chances of a positive result. To make this a successful one, it is essential to go through all the drive test criteria. It is important to go through the standards and pass the VicRoads test.The Drive Test is conducted with the assistance of Australian experts. The comprehensive test is designed for the assessment of the skills. The test is performed to monitor the driving tasks. License applicants must possess expert driving skills.A learning experience of over 12 months with a combination of 120 hours of expert driving experience is enough to excel as a professional driver. When the test is being conducted, the applicant gets directions to drive.
The test is done in a fixed assessment route for the performance of specific driving tasks. There is a well-planned test presided over by a License Testing Officer. The performance is based on assessment of special assessments. These assessments are conducted to record the performance of the assigned tasks.Driver Knowledge Test (DKT) is conducted under the supervision of a Service testing officer at Vicroads offices from Monday to Friday. The test is performed between 8:30 am and 4:30 pm.
The access is easily made to the location with the help of nearby local railway stations and bus routes. Looking for a compatible place for the VicRoads Mooroolbark test is the best idea. A course is professionally designed to teach you the maximum and make you a professional driver.
This article gives you a brief idea about the VicRoads Mooroolbark drive test.
1) Can I use my car?
Taking a self-owned car is the best option for a driving test. All the car requirements must be met to make the driving test a successful one for you.Requirements for the car:
Certain conditions must be met to make it eligible for a driving test:
- be taxed
- be roadworthy
- be insured
- must not have tire damage
- have no warning lights
- space-saver and spare tire fitted is not acceptable
- be smoke-free
- ability to reach 62mph
- must have mph speedometer
- have four wheels
- maximum authorized mass
- an extra rear-view mirror
- well-fit L-plates on the front and rear
- a passenger seatbelt( it is required for both the examiner as well as a proper passenger head restraint)
- Dashcams as well as other cameras
- camera fitted for insurance purposes
There are, however, other necessary elements that must be considered for both Manual and automatic cars. The manual cars must have three pedals. Automated vehicles must also have two pedals.
2) Pre-drive check
Conducting the test is made under the supervision of the testing officer. This is done under the control of the presiding officer. This is best in terms of checking the parts and testing your essential ability to monitor them. A pre-drive session is a necessary part before the actual test begins. This is the only point where you can check your skills and have a final look for the areas of your car that need improvement.
This check is done for demonstrating the vehicular parts and your skills. capability must be developed in testing the Indicators(left and right), Emergency lights/Hazard lights, washer & Wiper controls, Horn, Brake lights, Tyre Pressure, Handbrake, Demister(front & back), Headlights(high or low beam), Seatbelt, and the Brake light. The testing officer conducts the pre-drive check.This checklist is essential to be followed to ensure that you and the car are eligible to go forward with the further steps. If these controls are not working correctly, the assessment immediately is continued.The ability must be developed to start and stop the engine.
There are two purposes served by this check. The check is done to mark that the car is working correctly. The vehicle is roadworthy and safe.Functions that must be noted are as follows
- properly working indicators
- headlights in working condition( low and high beam)
- The washer and wipers
- horn and hazard lights
- rear demister and front demister
- a hand brake and foot brake
One must be cautious enough to listen to the instructions correctly before starting with the test. Proper knowledge about your vehicle and handling is a priority. You must not involve any wrong moves.
3) During the driving test
The driving test involves five parts. These include an eyesight check, general driving ability, vehicle safety questions, independent driving, and reversing your vehicle.The test is conducted to test your general driving ability. These tests are an assessment of your ability to drive on various road and traffic conditions. The examiner gives you the necessary instructions.There is a presiding license testing officer who goes for a short pre-drive check. Right after the physical test is conducted, the driving test is conducted for 30 minutes in total.This is further broken into two parts.
The first part comes with five to ten minutes. This marks exposure to less challenging situations. It becomes an assessment of your necessary driving abilities. Continuation of the test is marked right after the first ten-minute test.The testing officer then takes over a thorough assessment, and your performance is recorded.
The test then proceeds to the second part involving 20 minutes drive. Here the exposure is made to difficult traffic conditions. Here your driving ability on severe traffic conditions is monitored.There are several instructions given to you at this stage, and your performance is strictly monitored.
The best tip is to follow Driving school Mooroolbark norms. The safety tips are a consideration. A proper understanding of all the rules and regulations is essential.
4) On-road driving - stage one
Drive Test Mooroolbark is devised into two stages.
Stage one is designed as a relatively simple stage involving low-risk driving tasks. You are instructed to inspire and show in less-challenging traffic.This is the stage where the licensing officer is checking your necessary skills. The stage checks if you are driving safely. The conduct is made in small suburban streets. In this stage, you are marked for the reverse parallel parking ability or also a three-point turn.Right after this stage, the tester completes all kinds of paperwork and commencing to STAGE 2. The first stage is conducted for approximately 10-15 minutes. This is a test for your parking or turning skills. In this stage, the instructions are well explained. The officer will also assist in going for reverse parallel parking.
The guidelines about test driving are essential in every stage. Self-confidence and remembering the strategies taught at the Driving school Mooroolbark is vital for your success.
5) On-road driving - stage two
Stage Two is an assessment of safe driving skills. The only difference is that you are instructed to drive more complicated traffic situations. Thirty minutes of tests are conducted to mark your scores. On completion of the tests, the probationary licenses are given to you. When you are unsuccessful, you are available to reapply, marking your improvement, and trying again.A testing officer will be responsible for the test. The VicRoads monitoring officer who is involved in training accompanies you for testing your driving ability. The second stage comes with the involvement of practical driving skills in rough traffic. 20-25 minutes is the assigned time for the complete test. You will get the directions and Pay attention to driving conditions.
Tasks come with the involvement of Lane changing and merging, Gap selection ability, Traffic Observations, Lateral positioning on the road, Vehicle positioning, give way signs, and monitoring the traffic lightsThe Licence Testing Officer at the test locations after the completion of the test is assigned with Probationary P1 license details and Probationary P2 license.
The pre-drive check must be carefully conducted. You must be aware of all the instructions that have been assigned to you. Specific vehicle controls are also particularly monitored. Drive Test Criteria must be met up to complete this test.
6) Drive test results
It is easy to get penalized if something goes against the general rule. You may succeed with the test, or you might be labeled ineligible immediately. The testing officer is the one who decides the chances of your success and gives you the required feedback.The result declared is a reflection of your ability. It indicates whether or not you are eligible to get a licence so you can drive your car legally on roads.You might get positive feedback, which shows that you are well prepared and ready to prove yourself to be a competent driver.
Negative feedback is a reference to correct your flaws. It shows you the necessary points that need amendment.But no matter whether you have passed or failed, it is vital to listen to the feedback stated by the officer.In case you are failing, the licensing officer gives you proper instructions about how to excel and try on a later stage.Regular practice of 120 hours of driving is an essential strategy to make you a pro. Practicing in a wide range of different conditions makes you eligible to hold the Victorian driving license in the first attempt only. Every aspect of Drive Test Mooroolbark must be carefully noted to increase your chances of succeeding.
7) Serious errors during the driving test
Making mistakes during the driving test is quite common.Immediate termination is applied in the following cases:
- There is yet another penalty as “Critical Error.” critical error applies in the following cases:
- driving too slowly
- failing to give respect to other road users
- failing to signal
- blocking a pedestrian
- allowing one wheel to mount in unwanted spaces
It is imperative to note and obey the verbal or physical orders suggested by the presiding officer.
- colliding with another vehicle
- mounting the kerb
- exceeding the speed limit at any time
- violating the rules in the school zone
- stopping the car all of a sudden in a dangerous position
- disobeying a direction that has been instructed to you by the supervising officer
- Failing to give way.
There are faults recorded in the manner of a dangerous fault(the ones that pose actual danger), a serious fault(the potentially dangerous ones), a driving fault(repeatedly committed mistakes). The examiner tells you the faults that have been made. If you are eligible, you will get the pass certificate. Right after you have passed your test, you are ready to hold a driving license.
You can be successful in the first attempt of a driving test. But, practice makes you a pro. You are expected to practise regularly to get the license. It is good never to tailgate and beware of all the blind spots. During the driving test, you must Reposition the side mirrors.
Listening to the instructions carefully and Keeping your anger in check helps a lot and makes the test a practical way to get you a license. Using the turn signals and minding the four-way stop is quite necessary. You must never interfere with the passing lane. It is good to remember the mirrors regularly and maintaining the turn signals.
Getting yourself licensed for driving on the Victorian roads is a matter of pride. It is essential to follow all the instructions during the test and know the area. All you need to do is to practice driving so that you are entirely ready to go with the analysis! Getting access to one of the offices (the test locations) is quite a straightforward approach.Just fixing a road test appointment at the proper time and developing a habit of practicing regularly makes you an expert. The more you practice, the lesser is the chances of committing mistakes while you are driving on the Victorian roads. The entire team at the locations is there for you to help you out. Just book an appointment today and try for your license. I wish you a stroke of good luck.