The Comprehensive Guide to Pass the Driving Tests in Dandenong and Hold a VIctorian Licence
Guide to Pass a Drive Test in Dandenong and Hold Licence
Driving is fun. Owning a beautiful car and holding a driver’s license is something that everyone expects for. To attain the driving license for driving on Australian roads, you are expected to go through a comprehensive course that prepares you for a practical, on-road test. The test progresses you to the stage of a learner to a provisional license holder.The driving test gets conducted under the supervision of a Service testing officer.
Vicroads offices in Dandenong are always open from Monday to Friday between 8:30 am and 4:30 pm.
Some of them, however, are open till 6 pm. The best part is that the offices are well networked. It gives one access to the nearby local railway stations. Boarding a bus or a taxi is the easiest option available to visit the VicRoads offices. You can simply choose to visit the closest one. The decision is best for the VicRoads Dandenong drive test.
Perform the assigned tasks listed in the course immediately assigns you the driving license.In this article, you will gather information about the VicRoads Dandenong drive test.Let’s go through a section of important aspects complying with the driving test.
1) Can I use my car?
A safe self- owned car makes driving examiner a lot confident. This does not need to bear a complete tag of a “perfect car”. All you need to do is to follow certain guidelines to make your car a perfect one for the VicRoads Dandenong test.Fulfilling the following criteria makes you eligible for the test:Using a self-owned car is marked as a perfect decision for driving lessons. It becomes a practical driving test. It allows you to get some extra practice to improve your driving skills. Also, it increases the likelihood of you passing the test.
You can use your car for Vicroads Dandenong drive test provided it meets the following criteria:
- The car must be registered, and in perfect condition so that it meets the expectation of being used on roads.
- The entire speedometer must be visible both to the driver, to the testing officer as well as the passenger seat.
- It is desirable to have a supplementary display unit. However, GPS based cannot be used.
- Side mirrors working in fine condition is mandatory for the test.
- Rear window demister along with the presence of a windscreen is mandatory.
- Driver and passenger side mirrors make an important aspect.
- A seatbelt attached to seats is compulsory.
- The vehicle must show the “L” plates.
- Feature of temperature regulation is an important criterion to help attain convenience.
- The handbrake must be ain a working condition.
- Headlights must be in a perfectly working condition.
- Manual transmission is a mandatory field if you are looking for a manual transmission driving license.
2) Pre-drive check:
If you aspire to acquire a driving licence by passing your driving test, you need to put up a satisfactory performance by displaying a good understanding of the driving rules. Also, you need to assure your license testing officer about the fact that you are well acquainted with the different components of a car and the procedure to operate them.Given below is a Pre-Drive Checklist for passing the Drive Test Dandenong.
The license testing officer will always examine the primary components. This step is followed to scrutinize how much you are aware of the parts of the car.You must be a pro in demonstrating emergency parking brake, windshield wipers, arm signals, emergency flashers, defroster, turn signals, headlights, foot brake, headlights, and the horn. Parking Lot Driving is a mandatory field. You must be knowledgeable about the techniques of Leaving and Returning.The Intersections comprise eight total fields. These include speed, traffic checks, yields, limit lines and also braking. For Business or rural or residential driving, you must go through traffic checks, spacing, speed, and lane position. The driving supervisor keeps and eye over your overall driving behavior. They check your ability to follow signals, limit lines, speed up and stop the car, and your skill of controlling the steering while turning into a correct lane.
The main aspect of the pre-drive test is to show your skills and techniques. So, it is important to note that while going for a pre-drive test, you must follow the following criteria.
- Stop just ahead of limit lines
- The Traffic Check must be made. You are expected Look shoulder to shoulder, with the use of the car’s mirrors
- Turns must be made precisely
- Mind your speed of driving
- Space cushions must be maintained adequately
- You must make some complete stops.
By paying attention to safety information, you will give a good account of yourself as a safe, and smart driver.
It is good to be an active listener. Going slow with the instructions instead of rushing with the tasks proves you to be a perfect driver. You must not take help for the identification of windscreen demister. Genuine use of your skills and techniques is important.
3) During the driving test
Just after performing the short pre-drive check, you are exposed to Drive Test. The test is conducted for about 30 minutes. In the first five to ten minutes, you are exposed to less challenging situations. This is a test for the assessment of your basic driving abilities. This step marks your readiness to go ahead with the test.Right after this, the testing officer assesses and records the performance. This is a stage where the license testing officer from Driving school Dandenong evaluates driving behavior. During this test, you are expected to perform with your best potential in alternative traffic conditions.You will be checked for your observation, proper gap selection, and signal use. Distance maintenance and speed choice are noted. In addition to these, you are checked for stop and lateral position, parking technique.The very next step involves 20 minutes of driving into a broader range of traffic conditions. This is a thorough check for the normal driving tasks that you need to follow in your daily life.There are some rules which comply with the learner as well as probationary drivers. Learner drivers must possess 120 hours of supervised driving experience. This gives the learner drivers the option to own the probationary license. This marks the beginning of a two-stage probationary period.
The P1 section namely red P plates are ready for one Year. The P2 section namely green P plates are ready for three years. During the Drive Test, there is a clear identification for the readiness to drive safely. You are also checked for the potential to drive at night, in humid weather, as well as roads having different speed limits. You are also tested for the ability to drive safely and legally.
The best tip is to recall the safety tips learned by you during the driving training conducted at Driving school Dandenong. Following the above set of protocols help build a proper understanding of important driving aspects.
4) On-road driving - stage one
Stage one of the Drive Test Dandenong works as a stage that is planned to assess safety. In this stage, you are exposed only to the less challenging conditions. In this stage, there is an assigned testing officer who will supervise the test conducted. The stage is designed to hold simple and clear instructions for you. You are expected to follow the instructions. This shows that you are ready for driving safely and efficiently.Stage one takes a total time of 10 minutes for its completion. In this stage, you are then instructed to stop safely. This helps with the calculation of your score.It is important to make sure you do not resort to doing anything which is impermissible. Otherwise, you may end up being unsuccessful.Stage one expects you to start and stop the vehicle, maintaining a proper turn at the intersections. The technique for changing lanes is also monitored. This stage also expects you to go ahead with the low-speed parking maneuverable. The testing supervisor immediately instructs to go ahead with reverse parking, and three point-turning.
Once again, it is important to be very careful with the instructions during this phase. You must keep pace with the instructions to succeed with the test. A driving instructor or also your supervising driver can help you out if you are not too sure about the task.
5) On-road driving - stage two
Your success in the first stage of the on-road driving test, progresses you to stage two. In this stage, you are vulnerable to busier traffic. The stage is particularly planned out for the assessment of your ability to perform the safe execution of the normal driving tasks even in a busy traffic zone.The supervising test officer monitors your test. The conduct is made with simple and clear information. Following the steps and instructions help you to drive safely and efficiently even in busier traffic. It is very important to get a clear idea about the set of instructions before the start of the test. The test is conducted for 20 minutes. Unsafe or illegal activities are monitored during the test.
Stage two includes many aspects:
- You are tested for driving in a busier traffic zone.
- Your capability for changing lanes is monitored.
- Your ability to merge with other traffic is examined.
- You are expected to drive freely even on straight and curved roads.
Many challenges come to your way while this stage is conducted. It is important to again not indulge in illegal moves. You need to follow all the instructions while completing the tasks. The speed limit must be monitored while driving the vehicle. Sticking with the instructions is important while you are performing the test.
6) Drive test results
There are two chances. You may get positive or negative feedback. You may also prove to be unsuccessful.
Getting the feedback
When the test completes, the license testing officer comes up with the feedback. He or she will advise you as successful or unsuccessful. He or she will also let you know if your driving potential needs improvement.
marks that you are safe with the decision to become a safer driver. Sometimes, you are still exposed to higher crashing risks especially when you are new to driving. The feedback delivered to you helps develop safer and efficient driving skills.
marks that you go ahead with refining and correcting your skills. It makes you ready for the next attempt. The result guides you to practice more so that you are ready for the next attempt.
Being marked as unsuccessful
You might prove yourself to be unsuccessful, in case you were indulged in the activity of creating an unwelcoming situation. Committing serious errors makes you ineligible during the test. Any presentation of risky behavior is not desirable.
7) Serious errors during the driving test
Some serious and distinct serious errors might come up in the course of the test.
These errors come under the following categories:
- Immediate termination error
- Critical error
A short note about the immediate termination error
You are marked immediately unsuccessful if you commit something that puts either you or any only on road at risk.
When is an immediate termination error recorded?
The following situations can mark you for immediate termination.
- Collision with other vehicles, failing to maintain proper give way, signals, or checks makes you vulnerable to the immediate termination from the test.
- You are immediately terminated if you mount the kerb right while driving
- You cannot exceed the speed limit even by 5 km/h or more. You are not expected to exceed the speed limit by five seconds or more. In case you exceed your driving speed limits in the ‘school’ area, you are marked for the commitment of immediate termination error.
- Stopping the car in an unsafe position
- Disobeying a direction that has been instructed to you by the test supervising officer or any other member of the Police.
- Driving through a red traffic light or a stop sign.
When does the critical error get recorded?
A short note about the Critical error
The creation of any unsafe situation yet not an immediate danger can get you listed under this head.
- The following situations are noted as a critical error
- Driving too slow
- If you are failing to maintain signal norms but not harming any other vehicle
- If you are blocking a pedestrian crossing but not affecting the pedestrians
- Stalling of your car
It is important to learn how to avoid a collision. It is very important to abide by the rules and regulations while you are going through the course of the driving examination. You are not at all expected to commit any such activity that might prove to pose an immediate risk of injury. Proper practice regularly with the help of trainers from Driving school Dandenong makes you perfect to go ahead with the driving test without the commitment of any of the above-mentioned errors.
The driving test conducted in Australia is a test designed to test your extensive driving experience. This on-road test under the supervision of a testing officer makes you eligible as a driver. Through the course and test, your driving skills, awareness of other vehicles and pedestrians, decision-making is tested. On the completion of the test, a provisional P1 license is awarded to you. There is never a need to be stressed while getting you ready for the test. Constant practice with the idea of making yourself skillful enough is the key to get success. Wish you good luck!
The best way to avoid both immediate termination and critical errors
Paying attention to the set of instructions and also keeping an eye on the traffic signals is very important to avoid the commitment of errors. You can improve your performance significantly by paying heed to the instructions of a license testing officer.Driving above or also below the instructed speed limit isn’t desirable at all. Regular practice and keeping a good observation is the key to avoid errors while the test is being conducted.